HSR03201LIRC Redundant O-Ring

  • DIN-Rail Power Supply 1phase fix output TS35mm DIN EN 50022
  • Active Inrush Current Protection
  • Temperature Control
  • Clean C/V chart without foldback, ideal for dc drives and dc-UPS
  • Redundant Power Supply
  • Built in O-ring diode


Product Information (PDF)

STEP-Datei (STP)




HSR03201LIRC Redundant

ModelHSR03201LIRC Redundant
Nominal AC Input115/230Vac select
Input Range AC90..115Vac/184..265Vac
Input Range DC250... 375Vdc
Input Frequency47... 63Hz
Hold-Up Time40ms
Inrush Current Protection10,6Aeff / 15Apeak active protection ±6%
AutostartSoft start 20ms
Output Voltage24V48V60V
Adjust Range Vout22,5... 28,8V45,6... 52,8V57... 66V
Ripple & Noise mVpp20mV50mV50mV
Nominal Output Current13,5A6,7A5,4A
Power Boost <=60°C/60s16,2A8A6,5A
Stability at Load Switch±0,3%±0,1%±0,1%
Transient Time< 1ms
Basic loadIdling-proof
Short Circuit ProtectionContinuous
Ambient Operation Temperature-20°C... +70°C
CoolingNatural convection
Temperature MonitoringYes
Dimensions (WxHxD)120x124x96mm
Safety IECEN60950-1 EN50178 EN60204-1
Safety Class 1(A)VDE0100 VDE0805
Input to Output Isolation3000Vac
Climatic Class, Humidity3k3, 95% non condensing
MTBF IEC61709600000h
Power Good RelayYes
FeaturesBuilt-in redundant O-ring diode, low inrush current
OptionsSee datasheet