HSEureg10001 Lab Power Supply DIN-Rail, 5W/CUI

  • Cost effective 1000W voltage 0-Vmax programmable laboratory power supply
  • Multifunctional analogue Interface 0-10V/0-20mA
  • Remote Shutdown
  • Sensing
  • Perfect C/V charcteristic
Product Information (PDF) STEP-Datei (STP) Data Sheet (PDF)



Model HSEureg10001
Power 1008W
Nominal Input 115/230Vac select
Input Range AC 90..115Vac/184..265Vac
Input Range DC 250... 375Vdc
Input Frequency 47... 63Hz
Hold-Up Time 30ms
Inrush Current Protection NTC < 81A ( recommended MCB=C16A)
Autostart Soft start 100ms
Programmable Output Voltage 0-15V 0-30V 0-50V 0-90V 0-130V 0-180V
Continuous Current (fix) 50A 33A 20A 11,2A 7,8A 5,6A
Ripple & Noise mVss 50mV 50mV 100mV 200mV 250mV 250mV
Powerboost 55A 36,8A 22A 12,3A 8,6A 8,1A
Stability at Load Switch ±0,5%
Transient Time < 1ms
Efficiency 90%
Basic Load Idling-proof
Short Circuit Protection Continuous
Ambient Operating Temperature -20°C... +70°C
Cooling Natural convection & controlled fan from Papst
Temperature Monitoring Yes
Dimensions (WxHxD) 200x156x114,5mm
IP-Range IP20
Safety Norms CSA UL CE according to IEC60950-1
Safety IEC EN60950-1 EN50178 EN60204-1
Safety Class 1(A) VDE0100 VDE0805
Input to Output Isolation 3000Vac
Climatic Class, Humidity 3k3, 95% non condensing
EMI EN55022B
EMS EN61000-6-2,3
MTBF IEC61709 400000h
Programming Interface Voltage 0... 10Vdc, 0-20mA
Programming Interface Current No
Monitoring Interface Voltage No
Monitoring Interface Current No
Power Good Relay No
Sense Operation Yes
Remote Shutdown Yes
Reference Voltage No
Ordering Options Protective coating, 4-20mA interface
Options Isolating transformer for analogue interface, wall mount