• DIN-Rail Power Supply 1phase fix output TS35mm DIN EN 50022
  • Temperature Control
  • Clean C/V chart without foldback, ideal for dc drives


Product Information (PDF) STEP-Datei (STP) Data Sheet (PDF)



Model HPV10001
Power 1008W
Nominal AC Input 115/230Vac
Input Range AC 90..115Vac/186..265Vac
Input Range DC 250... 375Vdc
Input Frequency 47... 63Hz
Hold-Up Time 30ms
Inrush Current Protection NTC < 84A
Autostart Soft start 100ms
Output Voltage 72V 110V 150V 240V
Adjust Range Vout 58... 86V 86... 132V 132... 180V 180... 240V
Ripple & Noise mVpp 200mV 250mV 250mV 300mV
Nominal Output Current 13,9A 9,1A 6,7A 4,6A
Power Boost <=60°C/60s 15,3A 10A 7,4A 5A
Stability at Load Switch ±0,5%
Transient Time < 1ms
Efficiency 0,93
Basic load Idling-proof
Short Circuit Protection Continuous
Ambient Operation Temperature -20°C... +70°C
Cooling Natural convection + controlled fan from Papst
Temperature Monitoring Yes
Dimensions (WxHxD) 200x156x114,5mm
IP-Range IP20
Safety Norms CSA UL CE according to IEC60950-1
Safety IEC EN60950-1 EN50178 EN60204-1
Safety Class 1(A) VDE0100 VDE0805
Input to Output Isolation 3000Vac
Climatic Class, Humidity 3k3, 95% non condensing
EMI EN55022B
EMS EN61000-6-2,3
MTBF IEC61709 500000h
Power Good Relay Yes, Option
Ordering options Protective coating, Popwer Good Relais (PG)
Options See datasheet